ELECTRICAL PVC TUBING/SLEEVING

TEMPERATURE RANGE -45oC to +125oC


DESCRIPTION :

Heat resistant electrical PVC tubing/sleeving is available with the inside diameter range from 0,5 mm to 35 mm and wall thickness range from 0,3 mm to 4,0 mm in a variety of standard and custom colours, plain or stripped. Special sizes and finishes are available upon request. Heat resistant electrical PVC tubing/sleeving withstands prolonged exposure to hot oils and is resistant to most chemicals, oils, acids, common cleaning solvents and solutions. Heat resistant electrical PVC tubing/sleeving is self-extinguishing and successfully passed a full cycle flammability tests conducted according to Underwriters Laboratories Inc. standard UL 1581 method VW-1 as confirmed by a Test Report.


MATERIAL :

Electrical grade PVC certified to contain no cadmium and no lead


COLOURS :

White, black, blue, green, yellow, purple, red and other. Custom colours also available upon request.


APPLICATIONS :

Wire, cable, hydraulic lines etc. insulation, sleeving, shielding and protection against abrasion and damage. Especially useful in elevated temperature applications such as automotive wire harnesses etc. Commonly used as liquid and gas lines and also as fuel lines. Other uses include wire marking and identification, etc.


THERMAL PROPERTIES :

Temperature range - continuous -45oC up to +125oC


OTHER PROPERTIES :

Thermal stability at 200oC - no less than 550 min.
Volume resistivity at 20oC - 3,4 x 1013 Ohm cm
Dielectric strength - 27kV/mm minimum


STANDARDS :

PN-89/C-89209, PN-73/E-29200, PN-EN 60684-1:2002, DIN 40621, IEC 332-1, PN-92/T 90320


COMPILIANCE WITH DIRECTIVE EC :

Meets the requirements of the European Directive 2011/65/WE (RoHS 2) dated June 8, 2011 restricting the use of some substances within electrical and electronic equipment.


TESTS AND CERTIFICATION :

  • Certificate of Conformance - Biuro Badawcze Jakości - SEP,
  • Flammability Test Report No. TP-03.026/ UL1581:2001 VW-1,
  • Certificate - ZETOM Katowice
  • Certificate - Faculty of Electrical Engineering - High Voltage Division, Technical University of Lodz
  • Safety Mark B,

  • (more info)

PACKAGING :

  • Coils 500m, 250m, 100m in lenght
  • Coils of any length up to 30kg in weight
  • Custom packaging available upon request.

 

 

 

STANDARD TYPES, DIMENSIONS AND YIELD :

 
TYPICAL INTERNAL DIAMETER
[mm]
TYPICAL RANGE OF WALL THICKNESSES
[mm]
ESTIMATED YIELD
[mb/kg]
0.5, 1, 2 0.3 - 0.5 160 - 300
2, 3 0.5 - 1.0 125 - 155
3, 4 0.5 - 1.0 50 - 125
5, 6, 7 0.5 -  1.5 20 - 65
8, 9, 10, 11, 12 0.5 - 2.0 25 - 45
13, 14, 15, ... 19 1.0 - 2.0 15 - 25
20, 21, 22, 23 1.0 - 2.0 10 - 15
24, 25, 26, ... 30 1.0 - 2.0 5 - 10
31, 32, ... 35 1.0 - 2.5 3 - 5

 

 


© 2004-2014, Wytwórnia Artykułów z Tworzyw Sztucznych - Dariusz Kurant